SMC Networks 6726AL2 User Manual

C ONFIGURING THE S WITCH
3-8
Output
Port Configuration
Sets the output rate limit for each port 3-113
Output
Trunk Configuration
Sets the output rate limit for each trunk 3-113
Port Statistics Lists Ethernet and RMON port statistics 3-114
Address Table 3-121
Static Addresses Displays entries for interface, address or
VLAN
3-121
Dynamic Addresses Displays or edits static entries in the Address
Table
3-122
Address Aging Sets timeout for dynamically learned entries 3-124
Spanning Tree 3-124
STA
Information Displays STA values used for the bridge 3-126
Configuration Configures global bridge settings for STA
and RSTP
3-129
Port Information Displays individual port settings for STA 3-133
Trunk Information Displays individual trunk settings for STA 3-133
Port Configuration Configures individual port settings for STA 3-137
Trunk Configuration Configures individual trunk settings for STA 3-137
VLAN 3-140
802.1Q VLAN
GVRP Status Enables GVRP VLAN registration protocol 3-145
Basic Information Displays information on the VLAN type
supported by this switch
3-145
Current Table Shows the current port members of each
VLAN and whether or not the port is tagged
or untagged
3-146
Static List Used to create or remove VLAN groups 3-148
Static Table Modifies the settings for an existing VLAN 3-150
Table 3-2 Main Menu (Continued)
Menu Description Page

SMC Networks 6726AL2 Specifications

General

Brand	SMC Networks
Model	6726AL2
Category	Network Router
Language	English