SMC Networks HRR012-A*-20 Series User Manual

HRX-OM-W002-A
Chapter 5 Display and Setting of Various Functions
HRR Series 5.4 Basic setting mode
5-15
5.4.4 Notice for maintenance Menu
A notice for maintenance will occur when it is time to replace components
such as pumps and fans.
In addition, if the usable time of the dust filter and the DI filter is set
beforehand, a notice for maintenance will be generated when the usage time
is reached.
When a notice for maintenance is generated, the notice for maintenance
menu will be displayed.
If notice for maintenance has not occurred, this menu will not be displayed.
If the [MENU] key is pressed while a notice for maintenance is occurring, the
notice for maintenance menu TOP screen is displayed. Press the [MENU]
key while on the Notice for maintenance Menu TOP screen to switch to the
next menu.
To reset a notice for maintenance, refer to "5.5.6 Reset menu".
When a notice for maintenance is generated, "X" is displayed on the display
panel.
Table 5.4-1 shows the contents of the notice for maintenance number.
Table 5.4-1 Notice for maintenance list
1：For air-cooled type
2：Option DM [Electric conductivity control function, DI water (pure water) piping] only
℃
RUN
“X” is displayed if
a maintenance
notification
has occurred.
No. Generation ti me
MT.01
Cumulative operation time: It occurs at 20,000 hours.
MT.02
Cumulative operation time: It occurs at 60,000 hours.
MT.03
Cumulative operation time: It occurs at 20,000 hours.
MT.04
Cumulative use time: It occurs at 5,000 hours.
(It can be changed within the range of 1 to 9999 hour)
MT.05
Cumulative use time: It occurs at 5,000 hours.
(It can be changed within the range of 1 to 9999 hour)
Notice of DI filter maintenance  ２
Contents
Notice for pump maintenance
Notice for compressor maintenance
Notice for fan maintenance  １
Notice of dust-proof filter Maintenance  １

SMC Networks HRR012-A*-20 Series Specifications

General

Brand	SMC Networks
Model	HRR012-A*-20 Series
Category	Chiller
Language	English