To Next Page

To Previous Page

Getting Started

Set the date and time when you use your camcorder for the first time. Set the

geographical area, then the daylight savings time, the year, the month, the day, the hour

and then the minute, in that order.

If you do not use your camcorder for about 3 months, the date and time settings may

be cleared from memory (bars may appear) because the built-in rechargeable battery in

your camcorder will have been discharged during that time. In that case, charge the

built-in rechargeable battery by connecting the AC adaptor, and set the date and time

again (page 16, 132).

1 Open the LCD screen while pressing OPEN.

2 Turn the power on by sliding the POWER switch upward while pressing the

green button.

The CLOCK SET display appears.

3 Select the desired geographical area with v/V, and press ENTER.

Step 4 Setting the date and time

POWER switch

b/v/V/B/ENTER buttons

SETUP button

[ ENTER ] : NEXT ITEM

AREA 26

DST OFF

DATE Y M D

-5.0GMT

New York,Bogota

CLOCK SET