104
Erasing the cassette memory data
Erasing all the data in cassette memory
(1) Set the POWER switch to VCR or CAMERA.
(2) Press MENU to display the menu display.
(3) Turn the SEL/PUSH EXEC dial to select
, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select ERASE ALL, then press the dial.
(5) Turn the SEL/PUSH EXEC dial to select OK, then press the dial.
“OK” changes to “EXECUTE.”
(6) Press the SEL/PUSH EXEC dial.
“ERASING” flashes for about two seconds and “COMPLETE” appears after
erasing all the data.
To cancel erasing
Select RETURN in step 5 or 6, then press the SEL/PUSH EXEC dial.
To Next Page
Loading...
Need help?
General