49
Advanced Recording Operations
Releasing the SteadyShot function
When the SteadyShot function is working, the camcorder compensates for camera-
shake.
You can release the SteadyShot function when you do not need to use it. The
indicator appears on the LCD screen or in the viewfinder. Do not use the SteadyShot
function when shooting a stationary object with a tripod.
(1) Press MENU to display the menu in standby or memory mode.
(2) Turn the SEL/PUSH EXEC dial to select
, then press the dial.
(3) Turn the SEL/PUSH EXEC dial to select STEADYSHOT, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select OFF, then press the dial.
(5) Press MENU to erase the menu display.
To activate the SteadyShot function again
Select ON in step 4, then press the SEL/PUSH EXEC dial.
Notes on the SteadyShot function
•The SteadyShot function will not correct excessive camera-shake.
•If you use a tele conversion lens (optional) or a wide conversion lens (supplied), these
lens may influence the SteadyShot function.
Shooting with manual adjustment
CAMERA SET
D ZOOM
16 : 9W
I
DE
STEADYSHOT
FRAME REC
I
NT. REC
W
I
ND
[
MENU
]
:
END
2-4
1,5
CAMERA SET
D ZOOM
16 : 9W
I
DE
STEADYSHOT
FRAME REC
I
NT. REC
W
I
ND
RETURN
ON
OFF
[
MENU
]
:
END
MENU
CAMERA SET
D ZOOM
16 : 9W
I
DE
STEADYSHOT
FRAME REC
I
NT. REC
W
I
ND
RETURN
OFF
[
MENU
]
:
END
To Next Page
Loading...
Need help?
General