Editing
95
Superimposing a title
If you use a tape with cassette memory, you can superimpose the title while
recording or after recording. When you play back the tape, the title is displayed
for five seconds from the point where you superimposed it.
You can select one of eight preset titles and two custom titles (p. 99).
(1) Press TITLE to display the title menu in standby, recording, playback, or
playback pause mode.
(2) Turn the SEL/PUSH EXEC dial to select
, then press the dial.
(3) Turn the SEL/PUSH EXEC dial to select the desired title, then press the dial.
The title flashes.
(4) Change the colour, size, or position, if necessary.
1 Turn the SEL/PUSH EXEC dial to select the COLOUR, SIZE, or
POSITION, then press the dial. The item appears.
2 Turn the SEL/PUSH EXEC dial to select the desired item, then press the
dial.
3 Repeat steps 1 and 2 until the title is laid out as desired.
(5) Press the SEL/PUSH EXEC dial again to complete the setting.
In playback, playback pause, or recording mode:
The “TITLE SAVE” indicator appears on the screen for five seconds and the
title is set.
In standby mode:
The “TITLE” indicator appears. When you press START/STOP to start
recording, “TITLE SAVE” appears on the screen for five seconds and the title
is set.
SCENE5
You can also select the colour, size and
position of titles.
To Next Page
Loading...
Need help?
General