Sony DVCAM DSR-PD170P User Manual

119
“Memory Stick” Operations
Recording still images on a “Memory Stick” – Memory Photo
recording
While you are recording a still image
You can neither turn off the power nor press PHOTO.
When you press PHOTO on the Remote Commander
Your camcorder immediately records the image that is on the screen when you press
the button.
Recording images continuously
You can record four still images continuously. Select one of the two modes described
below before recording.
Continuous mode [a]
You can record four still images continuously. The number of images is in accordance
with remaining capacity of the “Memory Stick.”
Multi screen mode [b]
You can record nine still images continuously on a single page.
The number of images in continuous shooting
The number of images you can shoot continuously varies depending on the remaining
capacity of the “Memory Stick.” The shutter always clicks four times, however, the
number of images recordable may be less than four.
Note on using a video flash light (optional)
The video flash light does not work in the continuous or multi screen mode if you
install it to the intelligent accessory shoe.
[a]
[b]

Sony DVCAM DSR-PD170P Specifications

General

Brand	Sony
Model	DVCAM DSR-PD170P
Category	Camcorder
Language	English

Summary

Operating Instructions

Getting Started

Basic setup steps for the camcorder, including microphone installation and power connection.

Recording – Basics

Fundamental techniques for capturing video, covering recording a picture and usable cassettes.

Playback – Basics

Instructions on how to review recorded video content, including playing back a tape.

Advanced Recording Operations

Recording a still image on a tape – Tape Photo recording

Capturing still images onto a tape, useful for printing via video printer.

Shooting with manual adjustment

Fine-tuning camera settings like iris, gain, and shutter speed for optimal recording.

Advanced Playback Operations

Searching for a recording by index – Index search

Locating recorded scenes using index marks for easy searching.

Searching a recording by date – Date search

Finding recorded content based on the date it was captured.

Editing

Dubbing a tape

Copying video content from one tape to another using A/V or i.LINK connections.

Audio dubbing

Adding or replacing audio tracks on recorded tapes.

Setting time values

Setting the time code value

Configuring time code recording methods for shooting conditions.

Customizing Your Camcorder

Changing the menu settings

Adjusting various camcorder functions and modes via the menu system.

“Memory Stick” Operations

Using a “Memory Stick” – introduction

Overview of Memory Stick types, formats, and basic usage.

Recording still images on a “Memory Stick” – Memory Photo recording

Capturing still images onto a Memory Stick for later use.

Viewing a still picture – Memory Photo playback

Reviewing still images stored on a Memory Stick.

Preventing accidental erasure – Image protection

Safeguarding important images on a Memory Stick from accidental deletion.

Troubleshooting

In the recording mode

Solutions for common problems encountered during recording.

In the playback mode

Solutions for common problems encountered during playback.

Maintenance information and precautions

Moisture condensation

Addressing and preventing issues caused by moisture condensation.

Cleaning the video head

Procedures for cleaning video heads to ensure picture quality.

Specifications

Quick Reference

Identifying the parts and controls

Visual guide to the camcorder's buttons, connectors, and features.