Sony DVCAM DSR-PD170P User Manual

62
Frame by frame recording – Cut recording
You can make a recording with a stop-motion animated effect using cut recording. To
create this effect, alternately move the subject a little and make a cut recording. We
recommend that you use a tripod, and operate the camcorder using the Remote
Commander after step 6.
(1) Press MENU to display the menu in standby mode.
(2) Turn the SEL/PUSH EXEC dial to select
, then press the dial.
(3) Turn the SEL/PUSH EXEC dial to select FRAME REC, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select ON, then press the dial.
(5) Press MENU to erase the menu display.
The FRAME REC indicator lights up.
(6) Press START/STOP to start cut recording. The camcorder makes a recording
for about six frames, and returns to recording standby.
(7) Move the subject, and repeat step 6.
To cancel the cut recording
•Set FRAME REC to OFF in the menu settings.
•Set the POWER switch to OFF (CHG), VCR, or MEMORY.
Notes on cut recording
•The last recorded cut is longer than other cuts.
•The proper remaining tape time is not indicated if you use this function continuously.
•You cannot mark an index during cut recording.
1
6,7
5
POWER
OFF
(CHG)
CAMERA
MEMORY
VCR
FRAME REC
CAMERA SET
D ZOOM
16 : 9W
I DE
STEADYSHOT
FRAME REC
I NT. REC
W
I ND
[
MENU
] :
END
CAMERA SET
D ZOOM
16 : 9W
I DE
STEADYSHOT
FRAME REC
I NT. REC
W
I ND
RETURN
OFF
ON
[
MENU
] :
END
CAMERA SET
D ZOOM
16 : 9W
I DE
STEADYSHOT
FRAME REC
I NT. REC
W
I ND
RETURN
ON
[
MENU
] :
END
2-4
MENU
MENU

Sony DVCAM DSR-PD170P Specifications

General

Brand	Sony
Model	DVCAM DSR-PD170P
Category	Camcorder
Language	English

Summary

Operating Instructions

Getting Started

Basic setup steps for the camcorder, including microphone installation and power connection.

Recording – Basics

Fundamental techniques for capturing video, covering recording a picture and usable cassettes.

Playback – Basics

Instructions on how to review recorded video content, including playing back a tape.

Advanced Recording Operations

Recording a still image on a tape – Tape Photo recording

Capturing still images onto a tape, useful for printing via video printer.

Shooting with manual adjustment

Fine-tuning camera settings like iris, gain, and shutter speed for optimal recording.

Advanced Playback Operations

Searching for a recording by index – Index search

Locating recorded scenes using index marks for easy searching.

Searching a recording by date – Date search

Finding recorded content based on the date it was captured.

Editing

Dubbing a tape

Copying video content from one tape to another using A/V or i.LINK connections.

Audio dubbing

Adding or replacing audio tracks on recorded tapes.

Setting time values

Setting the time code value

Configuring time code recording methods for shooting conditions.

Customizing Your Camcorder

Changing the menu settings

Adjusting various camcorder functions and modes via the menu system.

“Memory Stick” Operations

Using a “Memory Stick” – introduction

Overview of Memory Stick types, formats, and basic usage.

Recording still images on a “Memory Stick” – Memory Photo recording

Capturing still images onto a Memory Stick for later use.

Viewing a still picture – Memory Photo playback

Reviewing still images stored on a Memory Stick.

Preventing accidental erasure – Image protection

Safeguarding important images on a Memory Stick from accidental deletion.

Troubleshooting

In the recording mode

Solutions for common problems encountered during recording.

In the playback mode

Solutions for common problems encountered during playback.

Maintenance information and precautions

Moisture condensation

Addressing and preventing issues caused by moisture condensation.

Cleaning the video head

Procedures for cleaning video heads to ensure picture quality.

Specifications

Quick Reference

Identifying the parts and controls

Visual guide to the camcorder's buttons, connectors, and features.