Using the CD-ROM
13
Overview
To read the documents
Do the following:
1 Insert the CD-ROM in your CD-ROM
drive.
A cover page appears automatically in your
browser.
If it does not appear automatically in the
browser, double-click on the index.htm file
on the CD-ROM.
2 Select and click on the manual that you
wish to read.
This opens the PDF file.
Memo
The files may not be displayed properly,
depending on the version of Adobe Reader. In
such a case, install the latest version you can
download from the URL mentioned in
“Preparations” above.
Note
If you have lost or damaged the CD-ROM, you
can purchase a new one to replace it. Contact your
Sony service representative.
The following operating conditions are
recommended for using the software recorded on
the CD-ROM:
SxS Device Driver Software
Applicable hardware
Computer conforming to ExpressCard/34 or
ExpressCard/54
OS
Microsoft Windows XP SP2 or later, Microsoft
Windows Vista, or Mac OS X v10.4.9 or later
For support information on the driver, refer to the
following URL:
http://www.sony.net/SxS-Support/
XDCAM EX Clip Browsing Software
OS
Microsoft Windows XP SP3 or later (32-bit
version), Microsoft Windows Vista SP1 or later
(32-bit version), or Mac OS X v10.4.11 or later/
v10.5.1 or later.
CPU
Windows: Intel Pentium 4 2.0 GHz or higher
(Intel Core 2 Duo Processor 2.0 GHz or
higher is recommended.)
Macintosh: Intel Core 2 Duo Processor 2.0 GHz
or higher (Intel Core 2 Duo Processor 2.4
GHz or higheris recommended.)
Memory
1 GB (2 GB or more is recommended.)
• Microsoft, Windows, and Windows Vista are
registered trademarks and/or trademarks of Microsoft
Corporation in the United States and/or other
countries.
• Intel Core and Pentium are trademarks of Intel
Corporation in the United States and/or other
countries.
• Macintosh and Mac OS are trademarks of Apple Inc.
registered in the U.S States and other countries.
Do the following to install the software on the
CD-ROM on your computer:
1 Insert the CD-ROM in your CD-ROM
drive.
A cover page appears automatically in your
browser.
If it does not appear automatically in the
browser, double-click on the index.htm file
on the CD-ROM.
2 Select and click on the software that you
wish to install.
The installer for the software starts up.
Follow the displayed instructions:
For details, refer to the User’s Guide or ReadMe of
the software.
System Requirements for Using
the Applications
Software Installation
To Next Page
Loading...
Need help?
General
