76
US
When the Zone2 Out function is enabled and
you select the same HDMI input for both the
main zone and zone 2, there may be some
interference on the audio and video signals in
the main zone. To avoid possible interference,
you can place priority on the main zone for
HDMI input selection.
1 Select “Settings” from the
home menu, then press .
2 Select “HDMI Settings,” then
press .
3 Select “Priority,” then press
.
4 Select “Main Only,” then press
.
Operating the receiver
from another zone
(ZONE 2 operations)
You can operate the receiver from zone 2. The
procedures in this section describe the
operations when an IR repeater, useful for
multi-zone features, is connected. When an IR
repeater is not connected, use this receiver in
the main zone.
1 Turn on the amplifier in zone 2.
In the case of illustration “Zone 2
connections”-1 (page 72), skip this step.
2 Press ZONE.
The remote control switches to zone 2.
Setting the priority for the main
zone and zone 2
ZONE
?/1
VOL
Input
buttons
SOURCE
To Next Page
Loading...
Need help?
General
Weight and Dimensions
