EasyManuals Logo

Sony STR-DH500 User Manual

Sony STR-DH500
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
40
GB
Settings for the system
(SYSTEM menu)
You can use the SYSTEM menu to set the size
and distance of the speakers connected to this
system.
Select “7-SYSTEM” in the amplifier menus.
For details on adjusting the parameters, see
“Navigating through menus” (page 33) and
“Overview of the menus” (page 34).
SYSTEM menu parameters
x SW SPK (Subwoofer)
•NO
If you have not connected a subwoofer,
select “NO”. This activates the bass
redirection circuitry and outputs the LFE
signals from other speakers.
•YES
If you have connected a subwoofer, select
“YES”.
Tip
In order to take full advantage of the Dolby Digital
bass redirection circuitry, we recommend setting the
subwoofer’s cut off frequency as high as possible.
x FRT SPK (Front speakers)
•SMALL
If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select “SMALL” to activate
the bass redirection circuitry and output the
front channel bass frequencies from the
subwoofer. When the front speakers are set
to “SMALL”, the center and surround
speakers are also automatically set to
“SMALL” (unless previously set to “NO”).
LARGE
If you connect large speakers that will
effectively reproduce bass frequencies,
select “LARGE”. Normally, select
“LARGE”. When the subwoofer is set to
“NO”, the front speakers are automatically
set to “LARGE”.
x CNT SPK (Center speaker)
NO
If you have not connected a center speaker,
select “NO”. The sound of the center
channel will be output from the front
speakers.
•SMALL
If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select “SMALL” to activate
the bass redirection circuitry and output the
center channel bass frequencies from the
front speakers (if set to “LARGE”) or
subwoofer.
LARGE
If you connect a large speaker that will
effectively reproduce bass frequencies,
select “LARGE”. Normally, select
“LARGE”. However, if the front speakers
are set to “SMALL”, you cannot set the
center speaker to “LARGE”.

Table of Contents

Other manuals for Sony STR-DH500

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sony STR-DH500 and is the answer not in the manual?

Sony STR-DH500 Specifications

General IconGeneral
EqualizerYes
Product colorBlack
Audio decodersDTS
Impedance8 Ω
RMS rated power500 W
Audio output channels5.1 channels
Total Harmonic Distortion (THD)1 %
Supported radio bandsAM, FM
Headphone outputs1
Dimensions (WxDxH)430 x 157.5 x 322 mm
Power requirements120 V, 60 Hz
HDMI ports quantity4
I/O ports2 x Anten. 1 x Coax. - in 3 x Compon. - in 1 x Compon. - out 2 x HD Compon. - in 1 x HD Compon. - out 2 x Compos. - in 1 x Compos. - out 1 x DM 3 x HDMI - in 1 x HDMI - out 2 x Opt. - in 1 x Sub. - out
Power consumption (standby)0.3 W
Weight and Dimensions IconWeight and Dimensions
Weight7400 g

Related product manuals