EasyManua.ls Logo

Sony STR-DH500 User Manual

Sony STR-DH500
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
41
GB
Amplifier Operations
x SUR SPK (Surround speakers)
•NO
If you have not connected surround
speakers, select “NO”.
•SMALL
If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select “SMALL” to activate
the bass redirection circuitry and output the
surround channel bass frequencies from the
subwoofer or other “LARGE” speakers.
•LARGE
If you connect large speakers that will
effectively reproduce bass frequencies,
select “LARGE”. Normally, select
“LARGE”. However, if the front speakers
are set to “SMALL”, you cannot set the
surround speakers to “LARGE”.
Tip
The “LARGE” and “SMALL” settings for each
speaker determine whether the internal sound
processor will cut the bass signal from that channel.
When the bass is cut from a channel, the bass
redirection circuitry sends the corresponding bass
frequencies to the subwoofer or other “LARGE”
speakers.
However, since bass sounds have a certain amount
of directionality, it is best not to cut them, if
possible. Therefore, even when using small
speakers, you can set them to “LARGE” if you want
to output the bass frequencies from that speaker. On
the other hand, if you are using a large speaker, but
prefer not to have bass frequencies output from that
speaker, set it to “SMALL”.
If the overall sound level is lower than you prefer,
set all speakers to “LARGE”. If there is not enough
bass, you can use the tone to boost the bass levels.
For details, see page 34.
x FRT DIST. (Front speaker
distance)
Lets you set the distance from your listening
position to the front speakers (A). If both
front speakers are not placed an equal distance
from your listening position, set the distance to
the closest speaker.
x CNT DIST. (Center speaker
distance)
Lets you set the distance from your listening
position to the center speaker.
x SL DIST. (Surround left speaker
distance)
x SR DIST. (Surround right
speaker distance)
Lets you set the distance from your listening
position to the surround speaker.
30˚30˚
100˚-120˚100˚-120˚
A A
continued

Table of Contents

Other manuals for Sony STR-DH500

Questions and Answers:

Sony STR-DH500 Specifications

General IconGeneral
EqualizerYes
Product colorBlack
Audio decodersDTS
Impedance8 Ω
RMS rated power500 W
Audio output channels5.1 channels
Total Harmonic Distortion (THD)1 %
Supported radio bandsAM, FM
Headphone outputs1
Dimensions (WxDxH)430 x 157.5 x 322 mm
Power requirements120 V, 60 Hz
HDMI ports quantity4
I/O ports2 x Anten. 1 x Coax. - in 3 x Compon. - in 1 x Compon. - out 2 x HD Compon. - in 1 x HD Compon. - out 2 x Compos. - in 1 x Compos. - out 1 x DM 3 x HDMI - in 1 x HDMI - out 2 x Opt. - in 1 x Sub. - out
Power consumption (standby)0.3 W
Weight and Dimensions IconWeight and Dimensions
Weight7400 g

Summary

Safety and Warning Information

Fire and Electric Shock Prevention

Measures to reduce risk of fire/electric shock from exposure to rain, moisture, and heat.

Battery Handling and Disposal

Instructions for safe battery handling and proper disposal in accordance with regulations.

Front Panel and Indicator Overview

Front Panel Controls and Layout

Detailed description of the receiver's front panel buttons, display, and jacks.

Rear Panel and Component Connections

Rear Panel Connection Terminals

Details on digital/analog input/output, antenna, and speaker connection jacks.

Remote Commander Operations

Remote Commander Overview and Functions

Introduction to the remote commander and its buttons for power, input, sound, tuning, and menus.

Getting Started: Initial Setup

Installing and Connecting Speakers

Guide to setting up a 5.1 channel speaker system and connecting them to the receiver.

Connecting the TV

Guide to connecting the television to the receiver for viewing.

Connecting Audio and Video Components

Instructions for connecting various audio/video components like CD players, DVD players, tuners, and VCRs.

Preparing the Receiver and Remote

Connecting power and performing initial setup operations.

Automatic Calibration (AUTO CALIBRATION)

Procedure to automatically calibrate speaker levels, distances, and settings.

Adjusting Speaker Levels and Balance

Using the test tone to adjust speaker levels and balance for optimal listening.

Playback Operations

Selecting and Playing Components

How to select and play back audio or video components connected to the receiver.

Amplifier Operations

Navigating Amplifier Menus

Guide to navigating and using the receiver's amplifier menus for adjustments.

Menu Parameters Summary

Summary of available settings and parameters within each amplifier menu.

Enjoying Surround Sound

AUTO FORMAT DIRECT (A.F.D.) Mode

Listening to high fidelity sound and selecting decoding modes for stereo and multi-channel audio.

Tuner Operations

Listening to FM/AM Radio

How to listen to FM and AM broadcasts using the built-in tuner.

Other Operations

Precautions for Safe Use

Troubleshooting Common Issues

Related product manuals