103
US
Using the Remote Control
Reassigning the input
button
You can change the default settings of the
input buttons to suit the equipment in your
system. For example, if you connect a Blu-
ray Disc player to the SAT/CATV jack on
the receiver, you can set the SAT/CATV
button on this remote control to control the
Blu-ray Disc player.
You cannot reassign the TV, TUNER,
BLUETOOTH, USB, HOME NETWORK, SEN
input buttons.
1 While holding down the input
button of which you want to
change the assignment, hold down
TV ?/1.
Example: While holding down
SAT/CATV, hold down TV ?/1.
2 With the TV ?/1 button held,
release the input button.
Example: With the TV ?/1 button
held, release SAT/CATV.
3 Referring to the following table,
press the corresponding button for
the category you want, then
release TV ?/1.
Example: Press 1, then release TV ?/1.
Now you can use the SAT/CATV
button to control the Blu-ray Disc
player.
a)
For details on the BD1 or BD3 setting, refer
to the operating instructions supplied with
the Blu-ray Disc player or Blu-ray Disc
recorder.
b)
Sony DVD recorders are operated with a
DVD1 or DVD3 setting. For details, refer
to the operating instructions supplied with
the DVD recorders.
c)
Sony VCRs are operated with a VTR 3
setting which corresponds to VHS.
Using the Remote Control
Note
Numeric
buttons
TV ?/1
Input
buttons
Categories Press
Blu-ray Disc player
(command mode BD1)
a)
1
Blu-ray Disc recorder
(command mode BD3)
a)
2
DVD player
(command mode DVD1)
3
DVD recorder
(command mode DVD3)
b)
4
VCR
(command mode VTR3)
c)
5
CD player 6
To Next Page
Loading...
Need help?
General
Weight and Dimensions
