95
US
Adjusting Settings
x Subwoofer Level
Lets you set the level of the subwoofer to
0 dB or + 10 dB when PCM signals are
input via an HDMI connection. You can set
the level for each input to which an HDMI
input jack is assigned independently.
• Auto: Automatically sets the level to 0dB
or +10dB, depending on the audio stream.
•+10dB
•0dB
x Fast View
Lets you set the operation of Fast View.
This fast HDMI switching function
supports all HDMI inputs.
• Auto: You can select HDMI input faster
than the normal selection.
• Off: Fast View and preview for HDMI
functions are not available.
Input Settings menu
You can adjust the settings for the
connections of the receiver and other
equipment.
x Input Mode
Lets you fix the audio input mode when
you connect equipment to both digital and
analog audio input jacks. For details, see
“Switching between digital and analog
audio (INPUT MODE)” (page 83).
x Input Edit
Lets you set the following items for each
input.
• Watch: Displays an input to the Watch
menu.
• Listen: Displays an input to the Listen
menu.
• Watch+Listen: Displays an input to both
the Watch and Listen menus.
x Audio Input Assign
Lets you set the audio input jack(s)
assigned to each input.
For details, see “Using other audio input
jacks (Audio Input Assign)” (page 83).
x Name In
Lets you set the name displayed on the
Watch/Listen menu.
You can enter a name of up to 8 characters
for inputs and display it.
It is more recognizable having the
equipment named on the display than the
jacks.
1 Select “Name In”, then press .
2 Select the input you want to name,
then press .
3 Press V/v repeatedly to select a
character then press b.
You can move the input position
backward and forward by pressing B/b.
4 Repeat step 3 to input a character
one by one, then press .
The name you entered is registered.
Network Settings menu
You can adjust the settings for the network.
The Network Settings menu is available
only when the Home Network or SEN
function is selected.
x Internet Settings
Lets you make the network settings. For
details, see “Configuring the network
settings of the receiver” (page 36).
•Wired Setup
• Wireless Setup
x Information
Lets you check the network information for
the network.
1 Select “Information”, then press .
To Next Page
Loading...
Need help?
General
Weight and Dimensions
