Sony STR-DN840 User Manual

24
US
3: Connecting the TV
You can watch the selected input image when you connect the HDMI TV OUT or
MONITOR OUT jack to a TV. You can operate this receiver using a OSD (On-Screen
Display) if you connect HDMI TV OUT jack to a TV.
Before connecting cords, be sure to disconnect the AC power cord (mains lead).
A Optical digital cord (not supplied)
B Audio cord (not supplied)
C Video cord (not supplied)
D HDMI cable (not supplied)
Sony recommends that you use an
HDMI-authorized cable or Sony HDMI
cable.
ARC
TV
A**
Audio/Video
signals
Video signalsAudio signals
CD*
or
B**
Recommended connection
Alternative connection

Sony STR-DN840 Specifications

General

Receiver type	-
Audio output channels	7.2 channels
Power output per channel (1KHz@8 Ohm)	150 W
Power output per channel (20-20KHz@8 Ohm)	- W
HDMI in	6
Digital audio coaxial in	1
Digital audio optical in	2
Connectivity technology	Wired & Wireless
Ethernet LAN	Yes
Supported radio bands	AM, FM
Preset stations quantity	61
Optical drive included	No
HDMI version	1.4a
Product color	Black
Audio decoders	Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS 96/24, DTS-HD
Apple docking compatibility	Not supported
Audio formats supported	AAC, LPCM, MP3, WAV, WMA
Supported video modes	1080p
Power consumption (standby)	0.3 W
Power consumption (typical)	240 W

Weight and Dimensions

Depth	329.4 mm
Width	430 mm
Height	156 mm
Weight	8500 g