Sony STR-DN840 User Manual

106
US
• Sony cannot be held liable in any way for
damages or other loss resulting from
information leaks during communication
using Bluetooth technology.
• Bluetooth communication is not
necessarily guaranteed with all Bluetooth
devices that have the same profile as this
receiver.
• Bluetooth devices connected with this
receiver must comply with the Bluetooth
specification prescribed by the Bluetooth
SIG, Inc., and must be certified to
comply. However, even when a device
complies with the Bluetooth
specification, there may be cases where
the characteristics or specifications of the
Bluetooth device make it impossible to
connect, or may result in different control
methods, display or operation.
• Noise may occur or the audio may cut off
depending on the Bluetooth device
connected with this receiver, the
communications environment, or
surrounding conditions.
If you have any questions or problems
concerning your receiver, please consult
your nearest Sony dealer.
Troubleshooting
If you experience any of the following
difficulties while using the receiver, use
this troubleshooting guide to help you
remedy the problem. Should any problem
persist, consult your nearest Sony dealer.
Note that if service personnel changes
some parts during repair, these parts may
be retained.
The receiver is turned off
automatically.
• “Auto Standby” is set to “On”
(page 97).
• The Sleep Timer function is working
(page 15).
• “PROTECTOR” is working
(page 118).
The ?/1 (on/standby) indicator flashes
in quick succession.
• The software update has error. Unplug
the power cord, and then plug in the
power cord again. The receiver will try
to update the software. If the indicator
continues to flash in quick succession,
contact your nearest Sony dealer.
No image appears on the TV.
• Select the appropriate input using the
input buttons.
• Set your TV to the appropriate input
mode.
• Move your audio equipment away
from the TV.
• Make sure that cables are correctly and
securely connected to equipment.
Power
Image

Sony STR-DN840 Specifications

General

Receiver type	-
Audio output channels	7.2 channels
Power output per channel (1KHz@8 Ohm)	150 W
Power output per channel (20-20KHz@8 Ohm)	- W
HDMI in	6
Digital audio coaxial in	1
Digital audio optical in	2
Connectivity technology	Wired & Wireless
Ethernet LAN	Yes
Supported radio bands	AM, FM
Preset stations quantity	61
Optical drive included	No
HDMI version	1.4a
Product color	Black
Audio decoders	Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS 96/24, DTS-HD
Apple docking compatibility	Not supported
Audio formats supported	AAC, LPCM, MP3, WAV, WMA
Supported video modes	1080p
Power consumption (standby)	0.3 W
Power consumption (typical)	240 W

Weight and Dimensions

Depth	329.4 mm
Width	430 mm
Height	156 mm
Weight	8500 g