Sony STR-DN840 User Manual

48
US
USB message list
Listening to FM/AM
radio
You can listen to FM and AM broadcasts
through the built-in tuner. Before
operation, be sure you have connected the
FM and AM antennas (aerials) to the
receiver (page 30).
The tuning scale for direct tuning is shown below.
* The AM tuning scale can be changed (page 50).
Message and explanation
Reading
The receiver is recognizing and reading
information of the USB device.
Device error
The memory of the USB device could not be
recognized (page 45).
Not supported
An unsupported USB device is connected, an
unknown device is connected, or the USB
device is connected through a USB hub
(page 45).
No device is connected
No USB device is connected or the connected
USB device is not recognized.
No Track
No track was found.
Tuner Operations
Tip
Area FM AM
USA, Canada 100 kHz 10 kHz*
Mexico 50 kHz 10 kHz*

Sony STR-DN840 Specifications

General

Receiver type	-
Audio output channels	7.2 channels
Power output per channel (1KHz@8 Ohm)	150 W
Power output per channel (20-20KHz@8 Ohm)	- W
HDMI in	6
Digital audio coaxial in	1
Digital audio optical in	2
Connectivity technology	Wired & Wireless
Ethernet LAN	Yes
Supported radio bands	AM, FM
Preset stations quantity	61
Optical drive included	No
HDMI version	1.4a
Product color	Black
Audio decoders	Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS 96/24, DTS-HD
Apple docking compatibility	Not supported
Audio formats supported	AAC, LPCM, MP3, WAV, WMA
Supported video modes	1080p
Power consumption (standby)	0.3 W
Power consumption (typical)	240 W

Weight and Dimensions

Depth	329.4 mm
Width	430 mm
Height	156 mm
Weight	8500 g