Edition
2016
Workshop Manual
PARK 120 - PARK 220
Chapter
6 Control cables
Page
43
Table of contents
6.1 Description ...........................................................................................................44
6.1.1 General Information .......................................................................................44
6.1.2 Cable ties ....................................................................................................... 44
6.2 Angle ball joints ...................................................................................................45
6.3 HST control cable ................................................................................................46
6.3.1 Disassembly ..................................................................................................46
6.3.2 Assembly .......................................................................................................46
6.3.3 Adjustment ..................................................................................................... 47
6.4 Brake cable ...........................................................................................................47
6.4.1 Disassembly ..................................................................................................47
6.4.2 Assembly .......................................................................................................48
6.4.3 Adjustment ..................................................................................................... 48
6.5 Accelerator cable .................................................................................................49
6.5.1 Disassembly ..................................................................................................49
6.5.2 Assembly .......................................................................................................49
6.5.3 Adjustment ..................................................................................................... 50
General description
All mechanical control commands given by the operator and sent to the various devices
are via sheath coated wires or, in some cases connector rods.
This chapter gives a brief description of these parts and lists all necessary repair and re-
placement procedures.
6 Control cables
To Next Page
Loading...
Need help?
General
