Edition
2016
Workshop Manual
PARK 120 - PARK 220
Chapter
1 General instructions
Page
7
The purchaser is covered by the national legislation in force in his country. Purchaser’s
rights envisaged by national laws are not in any way restricted by this warranty.
1.2.3 Interventions carried out after warranty expiry
For each intervention carried out on the machine, the Service Centre must ll in the report
indicating the machine’s serial number, a brief indication of the problem encountered, the
operations performed and any spare parts used.
A copy of said reports must be kept and made available to the Manufacture, together with
any replaced parts in the event of complaints from the Customer.
1.2.4 Reporting faults
Please report any faults which may recur with particular frequency to the Manufacturer so
that the problem in question can be duly investigated and corrective action implemented
during the production stage.
In the same way the Manufacturer will notify the Service Centre of any faults encountered
on the machines produced and provide indications on the best way to deal with them.
1.2.5 Ordering spare parts
When ordering spare parts it is essential to cite the code number (for reference use the
explosion diagram corresponding to the year of manufacture) indicated on the product’s
identication label.
To Next Page
Loading...
Need help?
General
