Legacy U.S.A. (E)
4
Climate control
4-11
– CONTINUED –
For cooling and dehumidification of the passenger compartment, air
flows through the instrument panel outlets:
1. Set the air inlet selection button to the “OFF” position.
2. Push the “
” button in.
3. Push the air conditioner button on.
4. Set the temperature control lever to the blue area.
5. Set the fan speed control dial to the highest speed.
J Defrosting or defogging
OM-H2182HB0259
ON position
To direct warm air to the windshield and front door windows:
1. Push the “
” button in.
2. Set the temperature control lever to the red area.
3. Set the fan speed control dial to the highest speed.
To stop the warm air coming from the ventilator at each side of the instru-
ment panel, turn each ventilator thumb-wheel to the “
” position.
To Next Page
Loading...
Need help?
General
