Subaru 1998 Legacy - CD Player Operation; To Select a Song from Its Beginning; To Select the Desired Disc; To Start Playback

Legacy U.S.A. (E)
5
Audio
5-43
– CONTINUED –
J To start playback
When the “CD-CH” button is pressed, the CD changer mode indicator
“CD-CH” will come on and the CD changer will start playback. The dis-
play shows the current disc number, truck number and the elapsed time
during playback.
NOTE
D If a disc is in the player, the “CD-CH” button (“CD” button) is used to
change from CD player operation to CD changer operation. Each time
the “CD-CH” button is pressed, the operating mode will change alter-
nately starting from CD player mode.
D At the end of the disc, playback automatically continues with the next
disc.
D After playback on the last disc finishes, the disc will automatically
return to the first disc and will automatically play back.
D If you have loaded fewer than 6 discs, any missing disc is automati-
cally skipped.
J To select the desired disc
Press either the disc up button “DISC ƞ” or disc down button “DISC Ɵ”
to select the desired disc. Each time the “DISC ƞ” button is pressed, the
indicated disc number will increase. Each time the “DISC Ɵ” button is
pressed, the indicated disc number will decrease. Constant pressure on
these buttons causes a continuous change in the disc number.
J To select a song from its beginning
B Forward direction
Briefly press the “""❚” button to skip to the beginning of the next
track. Each time the button is pressed, the indicated track number will
increase.
B Backward direction
Briefly press the “❚AA” button to skip to the beginning of the current
track. Each time the button is pressed, the indicated track number will
decrease.