Legacy U.S.A. (E)
10
Maintenance and service
10-51
– CONTINUED –
J Headlight
CAUTION
Halogen headlight bulbs become very hot while in use. If you
touch the bulb surface with bare hands or greasy gloves, finger
prints or grease on the bulb surface develop into hot spots, caus-
ing the bulb to break. If there are finger prints or grease on the
bulb surface, wipe them away with a soft cloth moistened with al-
cohol.
HB0342
Retainer
spring
Bulb
1. Disconnect the electrical connector.
2. Remove the retainer spring.
3. Replace the bulb, then set the retainer spring securely.
4. Reconnect the electrical connector.
J Fog light (OUTBACK and SUS)
CAUTION
Halogen light bulbs become very hot while in use. If you touch
the bulb surface with bare hands or greasy gloves, finger prints
or grease on the bulb surface develop into hot spots, causing the
bulb to break. If there are finger prints or grease on the bulb sur-
face, wipe them away with a soft cloth moistened with alcohol.
To Next Page
Loading...
Need help?
General
