Subaru 1998 Legacy - Clock Function

Legacy U.S.A. (E)
5
Audio
5-45
– CONTINUED –
CLOCK FUNCTION
The radio has a built-in clock function that displays the time when the
ignition switch is tuned either to “ACC” or “ON”.
HB0336
1 Time
2 CLOCK button
3 DISP button
3
2
1
J Display mode
You can select either the time display mode or function display mode by
pressing the “DISP” button continuously for more than 0.5 second.
B Time display mode
When the time display mode is selected, the time display takes prior-
ity of the function display. The time is shown on the display whenever
the ignition switch is “ACC” or “ON” position.
When the CD changer is switched on or the disc in the CD changer is
changed during the time display mode, the time display is replaced
by the disc number display. However, after the disc number has been
displayed for five seconds, it is replaced by the time display again.