Legacy U.S.A. (E)
7
Starting and operating
7-25
– CONTINUED –
release it. Then release the accelerator pedal.
The vehicle will maintain the desired speed.
Vehicle speed can be temporarily increased while driving with the cruise
control activated. Simply depress the accelerator pedal to accelerate the
vehicle. When the accelerator pedal is released, the vehicle will return to
and maintain the previous cruising speed.
J To temporarily cancel the cruise control
There are four ways to cancel the cruise control temporarily:
D Depress the brake pedal.
D Pull the control lever in the “CANCEL” direction.
D Depress the clutch pedal (manual transmission vehicles only).
D Shift the selector lever into the “N” position (automatic transmission
vehicles only).
To resume the cruise control after it has been temporarily canceled and
with vehicle speed of 25 mph (40 km/h) or more, push the control lever
upward in the “ACCEL, RESUME” direction to return to the original cruis-
ing speed automatically.
J To turn off the cruise control
There are two ways to turn off the cruise control:
D Push the main switch again.
D Turn the ignition switch to the “ACC” position (but only when the ve-
hicle is completely stopped).
J To change the cruising speed
B To increase the speed
1. Push the control lever upward in the “ACCEL, RESUME” direction
and hold it until the vehicle reaches the desired speed.
The control lever can be used for increasing the cruising speed slight-
ly. Pressing the control lever upward in the “ACCEL, RESUME” direc-
tion increases the vehicle speed about 1 mph (1.6 km/h). Press the
control lever repeatedly until the desired speed is reached.
OR
To Next Page
Loading...
Need help?
General
