Legacy U.S.A. (E)
5-46
B Function display mode
When the function display mode is selected, the time is not shown on
the display. The display indicates the current function only.
J Setting the time
1. Turn the ignition switch to “ACC” or “ON”.
2. Select the time display mode by pressing the “DISP” button for more
than 0.5 second.
3. To adjust hour: Press the “DISP” button and the “H” button together
to advance the hours in one-hour increments. Keeping the buttons
pressed advances the hours quickly.
4. To adjust minute: Press the “DISP” button and the “M” button
together to advance the minutes in one-minute increments. Keeping the
buttons pressed advances the minutes quickly.
NOTE
If the connection between the radio and battery is broken for any reason
such as vehicle maintenance or radio removal, the time setting will be
cleared. If this occurs, it is necessary to reset the time.
Installation of accessories
Always consult your SUBARU dealer before installing a citizen band ra-
dio or other transmitting device in your vehicle. Such devices may cause
the electronic control system to malfunction if they are incorrectly
installed or if they are not suited for the vehicle.
To Next Page
Loading...
Need help?
General
