User Manual 7 iSolarCloud App
figure 7-12 System Parameters
* The image shown here is for reference only.
Boot/Shutdown
Tap Boot/Shutdown to send the boot/shutdown instruction to the inverter.
For Australia and New Zealand, when the DRM state is DRM0, the "Boot" option will be pro
hibited.
Date Setting/Time Setting
The correct system time is very important. Wrong system time will directly affect the data
logging and power generation value. The clock is in 24-hour format.
Software Version
Version information of the current firmware.
7.8.2 Operation Parameters
Running Time
Tap Settings > Operation Parameters > Running Time to enter the corresponding interface.
figure 7-13 Running Time
PID Parameters
Tap Settings > Operation Parameters > PID Parameters to enter the corresponding inter
face.
87
To Next Page
Loading...
Need help?
General
