7 iSolarCloud App User Manual
Network Service
Provider
Grid Type
CitiPower & Powercor • ≤ 5 kVA for single-phase & 30 kVA for three-phase
• > 30 kVA three-phase
United Energy • UE-ST-2008.1: ≤ 10 kW for single-phase & 30 kW for three-
phase
•
UE-ST-2008.2: > 30 kVA three-phase
PowerWater Embedded Generation Notice Photovoltaic Systems:2020
SA Power Networks • TS129-2019: < 10 kW for single-phase & 30 kW for three-
phase
•
TS130-2017: > 30 kW & ≤ 200 kW
•
TS131-2018: > 200 kW
Horizon Power • HPC-9DJ-13-0001-2019: ≤ 10 kVA for single-phase & 30 kVA
for three-phase
•
HPC-9DJ-13-0002-2019: > 30 kVA & ≤1 MVA
westernpower EDM
＃
33612889-2019
AusNet Services Basic Micro Embedded Generation:2020
For compliance with AS/NZS 4777.2:2020, please select from Australia A/B/C. Please contact your
electricity grid operator for which region to use.
step 6 After finishing the settings, tap TUNR ON DEVICE at the upper right corner and the device will be
initialized. The App will send start instructions and the device will start and operate.
step 7 If the inverter is initialized, the App automatically turns to its home page.
- - End
7.5 Home
After login, the home page is as follows:
80
To Next Page
Loading...
Need help?
General
