7. Parameters of LCD Operation Manual
30
The parameters pertinent to the Ethernet communication can be set. DNS address 1 and
DNS address 2 can be set to the default values which are uploaded by the lower computer.
Other parameters are assigned by plant staff.
Set parameter with the aid of the pop-up keypad.
7.2 Running Parameters
Setting Running Parameters
Step 1 Tap "Function" from the default menu.
Step 2 Tap "Setting".
Step 3 Tap "Run-parameter" after entering the correct password.
Step 4 Set the running parameter by tapping the pop-up keypad and tap ENTER to confirm the
setting. Tap the up and down arrows marked by A in the figure above to turn pages.
Description of Running Parameters
Descriptions of the running parameters are shown in the following table.
To Next Page
Loading...
Need help?
General