18
3.2 Scope of Delivery
figure 3-1 Scope of Delivery
a. The mounting-bracket includes 2 mounting-bracket components and 1 connecting bar.
b. The SG30CX, SG30CX-NI, SG33CX, SG40CX, SG50CX, SG50CX-NI are respectively
provided with 6, 6, 6, 8, 10, 10 pairs of DC connectors and cord end terminals.
c. The screws include 1 M4×25 screw, 3 M4×10 screws, and 2 M6×65 screws.
d. The documents include the quick installation guide, packing list, warranty card, etc.
3.3 Inverter Storage
Proper storage is required if the inverter is not installed immediately.
• Store the inverter in the original packing case with the desiccant inside.
• The storage temperature must be always between -40℃ and +70℃, and the storage rel-
ative humidity must be always between 0 and 95 %, non-condensing.
• In case of stacking storage, the number of stacking layers should never exceed the limit
marked on the outer side of the packing case.
• The packing case should be upright.
3 Unpacking and Storage User Manual
To Next Page
Loading...
Need help?
General