26
Install the inverter at an appropriate height for ease of viewing LED indicator and operating
switch(es).
4.3 Installation Tools
Installation tools include but are not limited to the following recommended ones. If necessary,
use other auxiliary tools on site.
table 4-1 Tool specification
Goggles Earplugs Dust mask Safety gloves
Safety shoes Utility knife Slotted screwdriver
(M2, M6)
Phillips screwdriver
(M4, M6, M8)
Hammer drill
(φ12, φ14)
Pliers Marker Level
Rubber mallet Socket wrench set
(16mm)
Open-end wrench
(13 mm, 16 mm)
Anti-static wrist strap
4 Mechanical Mounting User Manual
To Next Page
Loading...
Need help?
General