5-30 CHASSIS
REMOVAL
• Support the motorcycle with center stand.
• Remove the cotter pin. (For E-03, 28, 33)
• Remove the axle nut 1.
• Remove the rear axle and disengage the drive chain from the
rear sprocket.
• Remove the rear wheel.
#
Do not operate the brake pedal during or after rear wheel
removal.
• Draw out the rear sprocket mounting drum along with the rear
sprocket from the rear wheel.
NOTE:
Before removing the rear sprocket mounting drum, slightly loosen
the rear sprocket nuts.
• Remove the rear sprocket 2 from the rear sprocket mounting
drum.
• Remove the spacer 3.
• Remove the retainer 4.
To Next Page
Loading...
Need help?
General
