6-4 ELECTRICAL SYSTEM
USING THE MULTI CIRCUIT TESTER
• Properly use the multi circuit tester (+) and (-) probes. Im-
proper use can cause damage to the motorcycle and tester.
• If the voltage and current values are not known, begin mea-
suring in the highest range.
• When measuring the resistance, make sure that no voltage is
applied. If voltage is applied, the tester will be damaged.
• After using the tester, turn the switch to the OFF position.
"
Before using the multi circuit tester, read its instruction
manual.
To Next Page
Loading...
Need help?
General
