2-22 PERIODIC MAINTENANCE
Check that all chassis bolts and nuts are tightened to their specified torque. (Refer to page 2-23 for the
locations of the following nuts and bolts.)
ITEM N
.
m kgf
.
m lb-ft
1 Steering stem head nut 65 6.5 47.0
2 Front fork upper clamp bolt 23 2.3 16.5
3 Front fork lower clamp bolt 23 2.3 16.5
4 Front fork cap bolt 23 2.3 16.5
5 Front axle 100 10.0 72.5
6 Front axle pinch bolt 23 2.3 16.5
7 Handlebar holder bolt 23 2.3 16.5
8 Front brake/clutch master cylinder mounting bolt 10 1.0 7.0
9 Front brake caliper mounting bolt 39 3.9 28.0
0 Front brake caliper housing bolt 21 2.1 15.2
A Brake hose union bolt (front & rear) 23 2.3 16.5
B Air bleeder valve (brake & clutch) 8 0.8 6.0
C Brake disc bolt (front & rear) 23 2.3 16.5
D Rear brake caliper mounting bolt 25 2.5 18.0
E Rear brake caliper housing bolt 30 3.0 21.5
F Rear brake master cylinder mounting bolt 23 2.3 16.5
G Rear brake master cylinder rod locknut 18 1.8 13.0
H Front footrest bolt 39 3.9 28.0
I Front footrest bracket bolt 23 2.3 16.5
J Swingarm pivot nut 100 10.0 72.5
K Rear shock absorber mounting nut (upper & lower) 50 5.0 36.0
L Cushion lever mounting nut 78 7.8 56.5
M Cushion lever rod mounting nut 78 7.8 56.5
N Rear axle nut 100 10.0 72.5
O Rear sprocket nut 60 6.0 43.5
P Rear torque link nut (front & rear) 35 3.5 25.5
CHASSIS BOLTS AND NUTS
Tighten initially at 1 000 km (600 miles, 1 month) and ev-
ery 6 000 km (4 000 miles, 12 months) thereafter.
To Next Page
Loading...
Need help?
General
