EXHAUST SYSTEM 6-3
OPERATION
The EXCS is operated by the signal supplied from the ECM.
The open/close operation of the EXCV is performed by the EXCVA which is controlled by the ECM by
changing the current direction of the actuator motor. The position sensor (incorporated in the EXCVA)
detects the EXCVA movement by measuring the voltage and then the ECM determines the EXCV opening
angle based on the engine rpm and gear positions.
Every time the ignition switch is turned ON, the EXCVA automatically drives the EXCV and detects full
close/open position voltages and sets the EXCV to middle position.
FULL CLOSE
FULL OPEN
SAMPLE
To Next Page
Loading...
Need help?
General
