73
(Continued)
Adjusting the sound quality of
analogue audio output
“Filter”
You can adjust the sound quality of an analogue
audio output. Set as your favourite with listening to
the actual sound.
• The factory default is “Mode 1”.
• Set “Analog Output” to “On” to use this function.
Note
• Adjustment is not available when “MQA
Decoding” is set to “On”.
Setting the limitation of
headphones output
“PHONES VOL Limitation”
You can set an upper limit on the headphones
output to avoid the extremely high volume when
turning this unit or playing back.
• The factory default is “On”.
Playing back CD more natural-
sounding audio
Re-mastering expands the playback band and
achieves a higher bit depth to reproduce natural and
expansive sounds close to original music sources.
1 Press [NWP].
2 Press [RE-MASTER].
• The factory default is “Off”.
• When setting the MQA decoding function to
“On”, the Re-master function will be set to “Off”.
To Next Page
Loading...
Need help?
General
