Tektronix DMM4020 User Manual

Front-Panel Operation
Controlling Trigger Functions 3
3-23
Recalling a Meter Configuration
To recall a configuration from internal memory:
1. Press M.
2. Press the RECALL CONFIG soft key.
3. Press the RECALL INT MEM soft key.
4. Press the soft key labeled with the memory location (CONFIGA through
CONFIGE).
To recall a configuration from external memory:
1. Press M.
2. Press the RECALL CONFIG soft key.
3. Press the RECALL USB soft key.
The Meter labels the first four soft keys with the first four memory locations
CONFIG01 through CONFIG04. The fifth soft key is labeled MORE to allow
access to all 100 memory locations.
4. To recall the Meter configuration from one of the first four memory locations, press
the appropriately labeled soft key. If you want a memory location other than the first
four locations, press the MORE soft key.
The display indicates the last memory location containing a Meter configuration. If
all configuration memory locations are filled, the Meter will always indicate memory
location 10.
5. To select the memory location, press either <-- or --> to select a specific digit.
With the digit selected, press the soft key labeled -- to decrement the digit or ++ to
increment the digit.
6. Once the chosen memory location is set, press the ENTER soft key to recall that
Meter configuration.
Note
Incompatible configurations (from incompatible configuration versions)
will not be loaded, but will generate error +229 "Incompatible
measurement configuration not loaded".
Managing Memory
The Meter provides a method of clearing internal memory and displaying the status of
external memory. Per Department of Defense requirements, the Meter allows the erasure
of Meter configuration and data files from external USB memory modules. Other files are
not erased from the modules.
To copy the last or interrupted readings file from internal memory to an already-inserted
USB memory device:
1. Press M.
2. Press the INIT MEAS TO USB soft key.
The copy process will take several seconds.
To erase USB memory, refer to the “Media Memory” section in Chapter 1.

Tektronix DMM4020 Specifications

General

Brand	Tektronix
Model	DMM4020
Category	Multimeter
Language	English