Tektronix TDS 200-Series Service Manual

Maintenance
6–48
TDS 200 Series Digital Oscilloscope Service Manual
Repackaging Instructions
This section contains the information needed to repackage the oscilloscope for
shipment or storage.
Use a corrugated cardboard shipping carton having a test strength of at least
275 pounds (125 kg) and with an inside dimension at least six inches (15.25 cm)
greater than the instrument dimensions.
If the instrument is being shipped to a Tektronix Service Center, enclose the
following information:
H The owner’s address
H Name and phone number of a contact person
H Type and serial number of the instrument
H Reason for returning
H A complete description of the service required
Seal the shipping carton with an industrial stapler or strapping tape.
Mark the address of the Tektronix Service Center and also your own return
address on the shipping carton in two prominent locations.
The oscilloscope should be stored in a clean, dry environment. The following
environmental characteristics apply for both shipping and storage (instrument not
operating):
H Temperature range: –20° C to +60° C
H Altitude: To 15,000 m
See the chapter Specifications for a complete listing of the environmental
characteristics.
Packaging
Storage

Tektronix TDS 200-Series Specifications

General

Brand	Tektronix
Model	TDS 200-Series
Category	Test Equipment
Language	English