Tektronix TDS 200-Series Service Manual

Maintenance
TDS 200 Series Digital Oscilloscope Service Manual
6–23
Remove the front panel knobs by firmly grasping the knob (with pliers if
necessary) and pull it away from the front panel. Install front panel knobs by
aligning the keyed knob with the shaft and pressing the knob onto the shaft.
NOTE. Wrap the plier jaws with tape (such as electrical) to avoid marring the
knob surface.
Front-Panel Knobs

Tektronix TDS 200-Series Specifications

General

Brand	Tektronix
Model	TDS 200-Series
Category	Test Equipment
Language	English