It specifies the encryption modes supported by the router, including:
⚫
None: It indicates that a WiFi network is not encrypted and any clients can access
the network without a password. This option is not recommended as it leads to low
network security.
⚫
WPA-PSK: It indicates that WPA-PSK is adopted to authenticate users.
⚫
WPA2-PSK: It indicates that WPA2-PSK is adopted to authenticate users.
⚫
WPA/WPA2-PSK Mixed: It indicates that WPA-PSK and WPA2-PSK are adopted to
authenticate users.
It specifies the password for connecting to the WiFi network. You are strongly
recommended to set a WiFi password for security.
It is recommended to use the combination of numbers, uppercase letters, lowercase
letters and special symbols in the password to enhance the security of the WiFi
network.
With this function enabled, wireless clients cannot find the SSID, and you need to
enter the SSID on the wireless clients to access the WiFi network. By default, this
function is disabled.
5.1.2 Separate the 2.4 GHz WiFi name from 5 GHz Wi-Fi name
Step 1 Start a web browser on a device connected to the router and visit tendawifi.com to log in
to the web UI of the router.
Step 2 Choose Wireless Settings > WiFi Name and Password.
Step 3 Set Preferred Band to Disable.
Step 4 Customize the 2.4 GHz and 5 GHz WiFi name and WiFi password.
Step 5 Click OK at the bottom of the page.
To Next Page
Loading...
Need help?
General
