90
10.2 IPv6 LAN setup
To access the page, log in to the web UI of the router and choose IPv6 > IPv6 LAN Settings.
You can change the IPv6 LAN settings here.
Parameter description
It specifies two types of IPv6 LAN address assignment.
⚫
Auto: The router generates the IPv6 address according to its LAN IPv6 address. By default,
the prefix has 64 digits.
⚫
Manual: You need to set the IPv6 LAN address manually.
It specifies two types IPv6 LAN prefix address assignment.
⚫
Auto: The router obtains an LAN prefix from the upstream device.
⚫
Manual: You need to set the IPv6 LAN prefix manually.
DHCPv6 (Dynamic Host Configuration Protocol for IPv6) is used to assign IP addresses and
prefix to IPv6 hosts on a network. It is the IPv6 equivalent of the DHCP for IPv4. This is also
known as a stateful autoconfiguration.
DHCPv6
Address
Assignment
Method
It specifies the assignment type of DHCPv6 address for the clients connected to the router.
⚫
Auto: DHCPv6 stateless configuration. Clients obtain their IPv6 address through Router
Advertisement (Stateless Auto Address Configuration) and other parameters are allocated
by the DHCPv6 server.
⚫
Manual: DHCPv6 stateful configuration. The DHCPv6 server automatically assigns IPv6
addresses/prefixes and other network configuration parameters (e.g. DNS server
addresses, etc.) to clients. The user needs to manually configure the start ID and the end ID.
To Next Page
Loading...
Need help?
General
