Tenda AC11 User Manual

85
− Navigate to the IPv6 > IPv6 Status, ensure that the IPv6 WAN address is a global
unicast address.
− Ensure that devices connected to router obtain their IPv6 address through DHCPv6.
− Consult your ISP.
10.1.2 DHCPv6
DHCPv6 enables the router to obtain IPv6 address from DHCPv6 server to access the internet,
which is applicable in the following scenarios:
− The ISP does not provide any PPPoEv6 user name and password.
− The ISP does not provide information about IPv6 address.
− You have a router that can access IPv6 network.
The application scenario is shown as below.
Configuring procedures:
Step 1 Start a web browser on a device connected to the router and visit tendawifi.com to log in
to the web UI of the router.
Step 2 Choose IPv6.
Step 3 Set the status of IPv6 to .
Step 4 Set the connection type to DHCPv6.
Step 5 Click OK at the bottom of the page.
---End

Tenda AC11 Specifications

General

Brand	Tenda
Model	AC11
Category	Wireless Router
Language	English