Need help?Do you have a question about the Thermo BioMate 3 series and is the answer not in the manual?
General| Wavelength Range | 190-1100 nm |
|---|---|
| Wavelength Accuracy | ±0.5 nm |
| Scan Speed | Up to 2400 nm/min |
| Display | 7-inch color touchscreen |
| Operating Temperature | 15-35°C |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Detector | Silicon photodiode |
| Data Interval | 0.1 nm, 0.2 nm, 0.5 nm, 1.0 nm, 2.0 nm, 5.0 nm |
| Connectivity | USB, Ethernet |
| Resolution | 0.1 nm |
| Operating Humidity | <80% relative humidity, non-condensing |
| Battery Life | Not applicable |
| Accuracy | ±0.002 Abs (0 - 0.5 Abs), ±0.004 Abs (0.5 - 1.0 Abs) |
Explains safety symbols and provides important information for using the instrument safely.
Step-by-step guide for unpacking and placing the spectrophotometer correctly.
Covers tests for determining nucleic acid concentration and purity.
Covers measurements for dsDNA, ssDNA, RNA, and oligos using factors.
Covers various protein quantification methods including Bradford, Lowry, BCA, and Biuret.
Describes protein concentration determination using UV absorbance and Warburg-Christian method.
Measures and displays sample absorbance or %Transmittance.
Measures concentration using factors or standards.
Performs advanced absorbance and %T measurements.
Measures concentration using advanced A/%T/C methods.
Guides on creating and using standard curves for quantitative analysis.
Analyzes reaction rates over time by measuring absorbance changes.
Scans a range of wavelengths to obtain spectral data.
Measures absorbance at multiple specified wavelengths simultaneously.
Checks the accuracy of wavelength readings using internal standards.
Verifies wavelength accuracy against external filter standards.
Measures absorbance accuracy against known standards.
General procedures for cleaning the instrument and its components.
To Next Page