To Next Page

To Previous Page

NG10 - Manual - 01 - 2015

INTRODUCTION

P1 IEC nomenclature for primary polarity mark of CTs (as an alternative to

a ANSI dot)

P2 IEC nomenclature for primary polarity mark of CTs (as an alternative to

a ANSI no-dot)

S1 IEC nomenclature for secondary polarity mark of CTs (as an alternative

to a ANSI dot)

S2 IEC nomenclature for secondary polarity mark of CTs (as an alternative

to a ANSI no-dot)

Self test Diagnostic

Start Leave an initial condition or reset condition (Pickup)

Trip Operation (with operate time)

Operating time Duration of time interval between the instant when the character-

istic quantity in reset condition is changed, under speciﬁed condi-

tions, and the instant when the relay operates

Dropout ratio The ratio of a reset value to an operate value in well-speciﬁed con-

ditions. The dropout ratio may be lower or greater than 1 according

as an over or under element is considered

Reset time Duration of the time interval between the instant when the charac-

teristic quantity in operate condition is changed, under speciﬁed

conditions, and the instant when the relay operates.

The stated reset time is related to a step variation of characteristic

quantity in operate condition to the reset condition.

Overshoot time The critical impulse time for a relay which is in its reset condition,

is the longest duration a speciﬁed change in the input energizing

quantity(ies) (characteristic quantity), which will cause the relay

to change to operate condition, can be applied without the relay

switches. The overshoot time is the difference from the operate time

and the critical impulse time.

The declared values for the overshoot time are applicable with the

lower setting value of the operation time.

MMI (Man Machine Interface) Operator front panel

ThyVisor Setting and monitoring software

Log ﬁle A text ﬁle that lists actions that have occurred (ThyVisor).

J2SE Java Platform Standard Edition

Subnet Mask (Ethernet nomenclature)

Sw Software

Fw Firmware

Upgrade Firmware upgrade

XML eXtensible Markup Language

Thytronic NG10 User Manual

Questions and Answers: