Checking the Hydraulic-Fluid Level (continued)
G417019
Full mark (dipstick)
Add mark (dipstick)
5. If the level is low, add the appropriate amount of the specified fluid to raise the level to
the full mark.
6. Install the dipstick onto the filler neck.
Inspecting the Hydraulic Lines and Hoses
Inspect the hydraulic lines and hoses for leaks, kinked lines, loose mounting supports, wear,
loose fittings, weather deterioration, and chemical deterioration.
Note: Make all necessary repairs before operating.
Replacing the Hydraulic Filters
IMPORTANT
Use of any other filters may void the warranty on some components.
3464-482A Page 6–35 Maintenance: Hydraulic System Maintenance
To Next Page
Loading...
Need help?
General
