To Next Page

To Previous Page

Cruise Control (continued)

2. Use the InfoCenter display to adjust the speed setting of the cruise control.

G462143s

Indicates the cruise control

speed

Indicates the maximum

traction speed (pedal stop)

This speed is locked out

under the protected PIN

menu.

Tips for Using the Cruise Control

• Set a cruising speed for long distances without many obstacles.

• On rough terrain, use the InfoCenter display to control the speed.

• Use the cruise control for turnarounds as follows:

1. While mowing, set a safe, comfortable speed for turning around at the end of mowing

passes.

2. Press the traction pedal to increase the speed for mowing during the mowing pass.

3. Take your foot off the pedal when turning around for the next mowing pass.

4. The machine will slow down to the low cruise control setting, allowing you to make an

efficient turnaround at a constant speed.

5. After turning around, use the traction pedal to increase the machine speed back up

for the next mowing pass.

Overview of the Acceleration Mode

This feature determines how quickly the machine changes traction speed when the traction

pedal is not in the N

EUTRAL position.

Note: If you take your foot off the traction pedal, allowing it to return to the NEUTRAL position

while the machine is moving, the braking profile is engaged. The braking profile is always

the same and cannot be customized by the acceleration mode feature.

Enter the protected menus on the InfoCenter display to change the acceleration mode. The

acceleration mode has the following 3 positions:

• L

OW—least aggressive acceleration and deceleration

• M

EDIUM (default)—medium acceleration and deceleration

• H

IGH—most aggressive acceleration and deceleration

Operation: During Operation Page 5–18 3464-482 A

Toro 03672 User Manual

Other manuals for Toro 03672