Toro Reelmaster 5010- H User Manual

Preparing the Machine (continued)
IMPORTANT
Retain the cap for later installation.
G437958
Preparing the Cutting Units
G402693
1. Remove the cutting units from the cartons.
Assemble and adjust them as described in the
cutting unit Operator's Manual.
2. Install the counterweight
to the appropriate
end of the cutting unit as shown.
G402694
3. Grease the carrier-frame shaft .
4. Repeat this procedure for the other cutting
units.
Setup: Installing the Cutting Units Page 3–3 3464-478 A

Toro Reelmaster 5010- H Specifications

General

Brand	Toro
Model	Reelmaster 5010- H
Category	Lawn Mower
Language	English