106
Picture and Sound Controls
Adjusting the audio
ā
Audyssey ABXā¢ātechnology uses sophisticated driver analysis
and low frequency monitoring to extend the range and bass of small
speakers. This enables the system to produce lower frequencies than
would be possible with a traditional system of the same size.
ā
Audyssey Dynamic Volume
Ā®
āautomatically adjusts volume to
provide a consistent sound level between television programs,
commercials, and between the loud and soft passages of movies.
ā
Audyssey Volume Extension
Ā®
ādoubles the volume capability in
small speakers while blocking distortion so your TV gets loud and
still sounds great.
ā
Day/Night Modesāautomatically keeps the volume of the TV at
the perfect level for day or night.
ā
Wall/Table Modesāautomatically keeps the volume at the perfect
level for television mounted on a wall or located on a table-top.
Using Audyssey EQ
Ā®
for Wall Mounted or Table-top TVs
This feature automatically keeps the volume at the perfect level for
television mounted on a wall or located on a table-top.
1 Press the SETUP button.
2 Select Sound > Audyssey Premium Television > TV Mounting
and press the OK button.
3 Press the
p
/
q
(arrow) buttons to select Wall or Table.
Using Audyssey Dynamic Volume
Ā®
This feature provides a consistent sound volume between television
programs, commercials, and between the loud and soft passages of
movies.
1 Press the SETUP button.
2 Select Sound > Audyssey Premium Television > Dynamic
Volume and press the OK button.
3 Press the
p
/
q
(arrow) buttons to select Night, Day, or Off.
NOTE
ā
If Dynamic Range Control is set to On, this feature is automatically set
to Off.
ā
This feature does not affect the audio signal output from the DIGITAL
AUDIO OUT terminal.
Audyssey ABXā¢
Audyssey ABX⢠technology uses sophisticated driver analysis and low