Advanced features
153
Network Device Setup
5 Use the
p
/
q
/
t
/
u
(arrow) buttons to navigate to the User Name
or Passwordeld.Inputtheusernameandpasswordusingthe
Software Keyboard or Wireless QWERTY keyboard (for L7300UC
series only).
❖
For more information, see “Using the software keyboard” on page
118.
NOTE
Only the 0-9 and capital/lowercase A-Z characters may be used for the user
name and password.
Setting up the Media Renderer feature
TheTVcanbeconguredasaMediaRenderer.Whenoperatingasa
Media Renderer, the TV displays content provided mobile devices or PCs.
The selection of the media is done by the media controller.
TheTVcanplayphoto,movie,oraudioleswhenoperatingasaMedia
Renderer.
1 Press the SETUP button.
2 Select Network > Network Device Setup > Media Renderer and
press the OK button.
3 Press the
p
/
q
(arrow) buttons to select On or Off, and then press
the OK button.
Device Name setup
The device name as a Media Renderer can be changed.
1 Press the SETUP button.
2 Select Network > Network Device Setup > Device Name Setup
and press the OK button.
3 Select the Device Nameeld.PresstheOK button.
The Software Keyboard screen appears.
4 Input the device name by using the Software Keyboard. To save
your setting, press the GREEN button.
5 Select Done. Press the OK button.
NOTE
The maximum number of characters allowed for the device name is 15.
Only 0-9, A - Z (upper case only), "-" can be used in the device name.
To Next Page
Loading...
Need help?
General