68
Setting up your TV
NOTE
You cannot tune skipped channels using the CH
p
/
q
buttons. Use
buttons 0–9 and the DASH button on the remote control.
Skipping video inputs
You can set video inputs to be skipped when selecting inputs in the Input
selection screen.
To turn on skip
1 Press the SETUP button.
2 Select Options > Input Option > Input Labeling and press the
OK button.
3 Press the
p
/
q
(arrow) buttons to select the item you wish to skip.
Then press the RED button to turn on Skip.
To turn off skip
Press the RED button again to turn off Skip.
Labeling analog TV channels
1 Press the SETUP button.
2 Select Options > Channel Options, and then press the OK button.
The list of channels appears.
ATV
DTV
ATV
ATV
DTV
DTV
DTV
Channel Options
101 - 201
201
101 - 201
201
101 - 201
201
101 - 201
Label
CH-1
CH-2
Ch Type
(Sample Image) Channel options
3 Press the
p
/
q
(arrow) buttons to select a channel to label.
4 Press the OK button.
The Software Keyboard window appears.
5 Input a name using the Software Keyboard, see “Using the software
keyboard” on page 118.
6 Press the GREEN button.
Skipping video inputs
To Next Page
Loading...
Need help?
General