82
Basic features
Using your computer with the TV
Adjusting the image
If the edges of the picture are hidden, readjust Horizontal Position and
Vertical Position. If the picture is affected by interference, readjust Clock
Phase and Sampling Clock.
1 Select PC input mode, see “Selecting the video input to view” on
page 71.
2 Press the SETUP button.
3 Select Picture > Display Settings and press the OK button.
4 Press the
p
/
q
(arrow) buttons to select PC Settings, and then
press the OK button.
NOTE
If a computer is not connected or there is no PC input signal, this menu will
not be available.
5 Press the
p
/
q
(arrow) buttons to select an item and press the OK
button.
6 Press the
t
/
u
(arrow) buttons to make adjustments.
NOTE
The screen is disrupted momentarily when adjusting the PC settings.This is
not a sign of malfunction.
Mode: Description: Adjustment Range
Horizontal Position Moves the picture left/right Within ±10 from center*
Vertical Position Moves the picture up/down Within ±10 from center*
Clock Phase Helps to reduce noise and sharpen
the picture
Within ±32 from center*
Sampling Clocks Helps to reduce noise and minimize
periodic vertical stripes on the screen
Within ±5 from center*
* The default settings and/or adjustment ranges vary depending on the input signal
format.
To reset the PC Settings:
Select Reset, and then press the OK button.
Setting the computer audio
You can output sound from your computer when connecting it to your TV,
using the AUDIO IN terminal and PC audio cable.
Using your computer with the TV
To Next Page
Loading...
Need help?
General